Multi-parametric analysis of an El Nino event using satellite derived SST, SSH and Wind field measurements
Kang Sung Chul, Robert Schumann, Shunji Murai, Honda Kiyoshi
Space Technology: Applications and Research Programme, Asian Institute of Technology
P. O. # 4, Klong Luang, Pathumtani, 12120, Thailand.
Tel : (662)-5246402, Fax: (662)-5245596
Abstract
The E1 Niflo event was investigated during NOAA AVHRR Multi-Channel Sea-Surface Temperature (MCSST) data, ERS AMI wind scatterometer data and TOPEX/Poseidon Altimeter data in the Pacific Ocean from 1991 to 1997. Derived parameters (sea surface temperature, wind vector and Sea surface height) were analyzed in order to investigate the relation between the ocean and the atmosphere.
Measurements from al instruments are observed and show marked variations between E1 Nino and Non E1 Nino conditions. Further investigations of temporal variations between their main parameters suggest that earliest detection of an E1 Nino is provided by scatterometer.
The sea surface temperature, wind, sea surface height differs form E1 Nino and Non-E1 Nino season. SST anomaly shows that during the El Nino season, the temperature (approximately +5°C) is higher than the normal season. Observed wind pattern shows a difference between the peak of an E1 Nino year and normal year. The weakening of trade wind is apparent from the zonal wind analysis. Sea surface height form TOPEX/Poseidon altimeter data shows that the sea surface height (almost 20 cm) is higher than normal season in Eastern Pacific ocean during the E1 Nino season.
Introduction
In the recent study by NOAA and FAO, it was reported that the current E1 Nino event is very strong and the impact on the Asian countries are increasing and linked to the some known disasters. So, some kind of prediction of El Nino is necessary to lessen the range of the disaster.
Now, we study this event using many methods such as ship observing data, buoy data and satellite data. However, the use of accurate information is vital because the prediction and assessment of the El Nino, because many numerical prediction models are needed accurate information (Moore 1995). Particularly, the condition of El Nino cannot be understood using only one climate parameter. Hence, investigation should consider other factors such as sea surface height. If these measurements are studies within same space and time, the results can be improved to understand and predict E1 Nino.
Methodology
Sea Surface Temperature (SST) was taken from NOAA AVHRR Multi-Channel Sea-Surface Temperature (MCSST) data. The AVHRR data was provided as a weekly data set. But some data sets had large sparse area because of cloud, which created a difficulty in investigating the data. This problem was solved by merge the weekly data sets as a monthly data set.
SST anomaly was calculated, which is useful technique when the date are subject to seasonal variations and EOF (Empirical Orthogonal Function, Kutzbach 1967) was conducted on anomaly data.
ERS 1, 2 AMI wind scatterometer data was taken for Wind field data. The first alias wind speed data was used from the wind scatterometer data. Each data put on 25 km x 25 km geographical data box and a monthly mean wind speed, zonal wind and wind vector data set were created.
Sea surface Height data was extracted from the TOPEX/Poseidon Altimeter data. From the extracted altimeter data set, sea surface height data was calculated by subtracting the corrected range that affect altitude. The environmentally corrected TOPEX/POSEIDON sea surface height relative to the reference ellipsoid is defined by:
SSH= sat_height - (altimeter_range + delta_alt_range + altimeter_bias) - geoid_height
-geocentric_body_tides-ocean_tides-atmospheric_loading
CNES (Centre national d'Etudes Spatiales) orbit altitude data was used as a satellite height. Delta_alt_range is the atmospheric corrections (wet troposphere correction, dry troposphere correction, ironospher correction, electromagnetic bias). The altimeter_bias is a bias of Topex/Poseidon altimeter. The TOPEX and POSEIDON ranges had been corrected for "absolute" bias based on platform measurements of sea level at Lampedusa Island and Harvest Platform. The best estimates of the respective absolute biases use the new orbits. In the data record, H_Geo was used as a geoid height. Geocentric_body_tieds is for body tides that are the movement of the Earth's crust which will cause changes in SSH. Ocean tides. H_EOT_C was used as a ocean tide. Atmospheric loading is the inverted barometer effect where an increase in atmospheric pressure results in a decrease in SSH, and an decrease in atm pressure results in an increase in SSH. After extracting all data set, the mean value of 95,96 and 97 data was used as a reference sea surface height. Fig 1 shows the study area and the TOPEX/Poseidon repeat cycle over study area.
